Design · Manufacture · Installation — Wellingborough, Northamptonshire

Get a quote

Service 08 · Banners

Banners & displays

Printed PVC and mesh banners, roll-up stands, exhibition displays and flags — printed on our own machines, hemmed and eyeletted by hand, and turned round in days rather than weeks.

Price a bannerSee the formats

Next day

Stock sizes printed and hemmed in 24 hours

Any size

Up to 3.2m wide in a single seamless drop

Hemmed & eyeletted

Never a raw cut edge, as standard

Reprints

Artwork held on file for repeat events

01 / Formats

Four formats that cover
almost every job.

The difference between a banner that lasts a season and one that tears out in the first gale is usually the material and the fixing, not the print. We will specify both against where it is actually going.

PVC banners

PVC banners

The workhorse. 510gsm blockout PVC, printed full colour, hemmed all round with brass eyelets at 500mm centres. Outdoors for a season or a decade, depending how you treat it.

Material
440–510gsm PVC
Fixing
Brass eyelets or pole pockets
Mesh banners

Mesh banners

Perforated so wind passes through instead of tearing the fixing out. The right answer on scaffolding, fence lines and anywhere exposed.

Airflow
30% open weave
Use for
Scaffold, fencing, gable ends
Roll-up stands

Roll-up stands

Cassette base, telescopic pole, graphic that changes without changing the hardware. The one display that lives in a car boot and still looks right.

Sizes
800mm, 1000mm, 1200mm
Reprints
Graphic only, base reused
Exhibition displays

Exhibition displays

Fabric pop-ups, straight or curved, with the graphic zipped over an aluminium frame. Packs into a wheeled case and goes up in ten minutes without tools.

Build
Tool-free, one person
Graphic
Washable fabric, zipped

02 / Outdoor & events

Built for weather,
and for the van at 6am.

Event work is unforgiving — it goes up in the dark, stands in the wind all day and comes down in a hurry. Everything here is specified so that it survives being handled badly.

Feather & teardrop flags

Ground spike, cross base or water base depending on the surface. Double-sided printing so it reads from both approaches.

Hoarding & fence wraps

Printed panels or banner runs along a site line, sized to the bay spacing so the joints land on the uprights rather than mid-graphic.

Event & sponsor boards

Backdrops, start-finish gantries and sponsor walls, printed to a schedule and packed by location so the right roll lands at the right gate.

Fitters tensioning a large printed banner onto scaffolding

Flags

Feather and teardrop flags on ground spikes, cross bases or water bases — printed both sides so they read from either approach, and supplied with the pole kit in a carry bag.

Stock-size banners24–48 hours
Roll-ups & flags3–5 working days
Exhibition displays7–10 working days

03 / Made here

Printed, hemmed and eyeletted under one roof.

001

Send the size

A rough size and where it is going is enough. We will tell you the material and the fixing that suits the location.

002

Artwork

Supply print-ready or let us set it out from your logo. You see a scaled proof with the eyelet positions marked before it prints.

003

Print & finish

Printed on our own roll-to-roll, hemmed and eyeletted by hand on the bench downstairs — not sent out and waited on.

004

Fitted or delivered

Rolled and boxed for you to fix, or our team on site with the access equipment if it is going up high.

04 / Questions

The ones we
get asked most.

How quickly can I have a banner?

Stock sizes are printed, hemmed and eyeletted within 24 to 48 hours. Roll-ups and flags take three to five working days, exhibition displays seven to ten. Everything runs on our own roll-to-roll in Wellingborough rather than being sent out and waited on, which is what makes those times possible.

PVC or mesh — which do I need?

Mesh anywhere exposed. It is perforated to a 30% open weave so wind passes through instead of tearing the fixing out, which is why it is the right answer on scaffolding, fence lines and gable ends. Solid 440 to 510gsm PVC is for sheltered positions, where it gives the stronger colour.

How big can you print in one piece?

Up to 3.2 metres wide in a single seamless drop. Every banner is hemmed all round with brass eyelets at 500mm centres as standard — we do not supply a raw cut edge.

Can you reprint the same banner next year?

Yes. Artwork stays on file, so a repeat for an annual event runs from it unchanged. On roll-up stands you reprint only the graphic — the cassette base and pole are reused.

Do you fit banners as well as supply them?

Either. Most are rolled and boxed for you to fix yourself. Where it is going up high, our own team comes out with the access equipment.

24-hour turnaround on stock sizes

Tell us the size and the date.

Where it is going, how long it needs to last and when you need it in your hands. We will specify the material and the fixing, and hold the artwork for the reprint.

Start an enquiry01933 449099

Crafting signs